Terma has invested in pipe bending technology which allows it to produce heated towel rails such as the Warp S. Warp S is designed with large flat bars which sweep forward and then bend backwards on themselves to create a towel rail which is only mounted to the wall on one side, leaving the other side open and free for easily hanging towels on. Warp S can be mounted either way up as it has symmerical bars top and bottom, so the horizontal bars can reach out to the left or right hand side as you prefer. Think about where the towel rail will be placed in your bathroom in relation to the walls and which side of the towel rail provides easier access. Warp S has a very free floating effect as there are minimal brackets on show and it is free from obstruction for hanging the towels. Warp S has a large surface area in comparison to lots of standard ladder type rails - this means you get a higher heat output. The electric towel rail is pre filled with oil and supplied with a factory-installed heating element (with the selected type of cable), meaning it can be installed and connected with minimal comissioning.