Instructions for creating configuration codes for TERMA products

Each article produced by Terma has its own unique SKU. It consists of a product code that defines a type of product, a model and size, and configuration code that defines specific features such as colour or connection type.

DESCRIPTION OF THE SYMBOLS

All codes starting with "W" come from products manufactured or completed in Terma. 

WG - water or dual fuel, central heating towel rail or radiator

WL - electric towel rail or radiator filled with oil and fitted with a factory installed heating element

WO - electric towel rail or radiator filled with oil only (no heating element)

WS - dry electric towel rail or radiator with a heating cable

WW - electric towel rail or radiator filled with oil, with built-in ONE heating element

WZ - dual fuel, central heating towel rail or radiator with built-in ONE heating element

WR - accessory (e.g. hanger, railing, valve kit)

WE - electrical heating element or controller

T - goods (external products, valves)

 

CONFIGURATION CODE FOR A WATER OR DUAL FUEL, CENTRAL HEATING TOWEL RAIL OR RADIATOR („WG” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

The E symbol at the end of the configuration code means epoxy primer (additional coating increasing the corrosion resistance of the radiator). If a radiator is ordered without epoxy coating, this symbol should be omitted. 

The colours palette and connections available for each radiator model can be found on the appropriate subpage at www.termaheat.com

 

CONFIGURATION CODE FOR A CAMBER RADIATOR („WG” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

The 01 symbol at the end of the configuration code indicates an order without a valves set. When ordering a radiator with a valves set, this symbol should be omitted.

The colours palette and connections available for the CAMBER radiator can be found here

 

CONFIGURATION CODE FOR A PLAIN TOWEL RAIL RADIATOR („WG” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

In case of a painted frame, a 3-character symbol of the frame colour should be added at the end of the code. For frames with the standard coating, which is chrome, the last 3 characters should be omitted.

The colours palette and connections available for the PLAIN TOWEL RAIL radiator can be found here

 

CONFIGURATION CODE FOR AN ELECTRIC TOWEL RAIL OR RADIATOR FILLED WITH OIL AND FITTED WITH A HEATING ELEMENT („WL” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

*0 - applies ONE heating element only
1 - 5 - applies to all heating elements except ONE and SIM/SIS models

In case of radiators with SIM/SIS heating element, the last character of the configuration code determines the colour of the cable:
1 - white
4 - silver

The E symbol at the end of the configuration code means epoxy primer (additional coating increasing the corrosion resistance of the radiator). If a radiator is ordered without epoxy coating, this symbol should be omitted. 

The colours palette and connections available for each radiator model can be found on the appropriate subpage at www.termaheat.com

 

CONFIGURATION CODE FOR A DUAL FUEL, CENTRAL HEATING TOWEL RAIL OR RADIATOR WITH BUILT-IN ONE HEATING ELEMENT („WZ” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

The E symbol at the end of the configuration code means epoxy primer (additional coating increasing the corrosion resistance of the radiator). If a radiator is ordered without epoxy coating, this symbol should be omitted. 

The colours palette and connections available for each radiator model can be found on the appropriate subpage at www.termaheat.com

 

CONFIGURATION CODE FOR A ELECTRIC TOWEL RAIL OR RADIATOR WITH BUILT-IN ONE HEATING ELEMENT („WW” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

The E symbol at the end of the configuration code means epoxy primer (additional coating increasing the corrosion resistance of the radiator). If a radiator is ordered without epoxy coating, this symbol should be omitted. 

The colours palette and connections available for each radiator model can be found on the appropriate subpage at www.termaheat.com

 

CONFIGURATION CODE FOR A DRY ELECTRIC TOWEL RAIL OR RADIATOR WITH HEATING CABLE („WS” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

The E symbol at the end of the configuration code means epoxy primer (additional coating increasing the corrosion resistance of the radiator). If a radiator is ordered without epoxy coating, this symbol should be omitted. 

The colours palette and connections available for each radiator model can be found on the appropriate subpage at www.termaheat.com

 

CONFIGURATION CODE FOR AN ELECTRIC TOWEL RAIL OR RADIATOR FILLED WITH OIL, NO HEATING ELEMENT („WO” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

The E symbol at the end of the configuration code means epoxy primer (additional coating increasing the corrosion resistance of the radiator). If a radiator is ordered without epoxy coating, this symbol should be omitted. 

The colours palette and connections available for each radiator model can be found on the appropriate subpage at www.termaheat.com

 

CONFIGURATION CODE FOR ACCESSORIES AND MASKING COVER FOR MICHELLE, IRON AND CASE SLIM WITH METAL AND MIRROR CASING („WR” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

The E symbol at the end of the configuration code means epoxy primer (additional coating increasing the corrosion resistance of the radiator). If a radiator is ordered without epoxy coating, this symbol should be omitted. 

The colours palette for accessories can be found on the appropriate subpage at www.termaheat.com

 

CONFIGURATION CODE FOR CASE SLIM GLASS OR GRAPHIC MASKING FRONT („WR” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

The E symbol at the end of the configuration code means epoxy primer (additional coating increasing the corrosion resistance of the radiator). If a radiator is ordered without epoxy coating, this symbol should be omitted. 

The colours palette for Case Slim radiator can be found here. 

 

CONFIGURATION CODE FOR ELECTRIC HEATING ELEMENTS („WE” PRODUCT GROUP)

Product codes can be found in the product tables in both the catalogue and the price list. They provide basic information about the product and the configuration code contains information that complements the specification. When placing an order, the product codes should contain the fully completed configuration part. Part of the configuration code should be placed after the main product code as shown in the example below:

* refers to SIM elements
** refers to class II
*** refers to KTX/SKT and BL1