Terma Split (kl. I)

Easy to assemble

The unique feature of the KTX range of heating elements is the Terma‑Split System. The Terma‑Split connector makes it possible to disconnect the TS 1 from the controller head. The TS 1 screws into the radiator and is tightened with a standard 24 mm spanner, then the controller can be fitted onto the Terma‑Split connector. The connector is then hidden within the controller case.

A unique characteristic of heating elements by Terma. This innovative solution separates the heating element from the controller. the heating element itself should be "traditionally" screwed into the radiator with the spanner. The controller should then be installed on the head of the heating element. The only visible element remaining is the electric controller, as the connector is hidden within the casing.

Advantages:

Easy and safe installation
Capability to change the controller for a different model at any time, without any interference in the installation
Capability to remove the controller e.g.: for the renovation period
Capability to place the controller at any suitable angle towards the radiator (340° of rotation)

• • Capability to use a heating element of any power within the 120 - 1000 W range (independently from the controller)

Information for Customers

Please be reminded that Terma electric heating elements must only be used in systems properly filled with a heating medium (such as water or another approved fluid, as specified in the user manual)

Important: Do not switch on the heating element unless the heating rod is fully submerged in the heating medium. Operating the unit while dry can result in damage to the product.

Always check that the heating element is completely immersed before powering it on.

Call

Ask a question

Karta produktowa

Technical parameters

3D visualization

Downloads

Technical parameters

Heater functions

Ideal for DIY installation
The Terma‑Split connector makes it possible to disconnect the heating element from the controller head, e.g. during renovation.
Ability to change the controller head without shutting off the installation
Option of connecting a heating element of any power within the 120-1000 W range (regardless of the controller model)
Designed class I devices (for class II devices see TS2)
The controller can be tilted at a suitable angle (340° rotation angle)
Easy and safe installation

Technical specification

Power :

230V/50Hz

Available output power :

120, 200, 300, 400, 600, 800, 1000W

Protection devices :

Klasa I

Radiator connection :

1/2”


Model header	Color	Wattage	L [mm]	Product Code	Configure Code
Terma Split Class 1	-	120	325	WETS101	K---D
Terma Split Class 1	-	200	285	WETS102	K---D
Terma Split Class 1	-	300	310	WETS103	K---D
Terma Split Class 1	-	400	345	WETS104	K---D
Terma Split Class 1	-	600	375	WETS106	K---D
Terma Split Class 1	-	800	485	WETS108	K---D
Terma Split Class 1	-	1000	575	WETS110	K---D