Poland
English
French
Russian
German
Czech
Spain
Sweden
Latvia
Estonia
Denmark
Lithuania
TERMA Home
Download the free TERMA Home app to take full control of your comfort.
Functions and features
MOA WiFi is a state-of-the-art heating element designed for electric and dual-fuel radiators. It combines convenient manual control with advanced remote management via the Terma Home application.
The MOA WiFi heating element allows users to regulate temperature either manually through on-device buttons or remotely via the Terma Home app on a smartphone or tablet. This ensures full control of home heating - anytime and from anywhere in the world.
The device is equipped with dual temperature sensors (radiator and ambient air) to deliver precise and energy-efficient performance. Once activated, the heater quickly raises the radiator temperature to the programmed setpoint and then operates in cycles, drawing only as much power as required to maintain thermal comfort. This means lower energy bills and a more eco-friendly heating.
Safety
- Ambient temperature sensor (external)
- Internal sensor monitoring heating medium temperature
- Thermal safety fuse
- Anti-Freeze function (protection against freezing)
- Child lock function
Functionality
The MOA WiFi heating element serves as a heat source in electric radiators filled with a heating medium, as well as in dual - fuel (hydronic - electric) radiators. It enables both manual and remote (via the TERMA Home application) precise temperature adjustment - locally in the range of 16 – 25°C, or 15 – 30°C via the app. It also features a Dryer Mode for rapid room heating or efficient towel drying.
Compliance with Standards
- Electrical safety standards for household appliances
- EMC directives
- Network security standards
- Ecodesign requirements
Remote Control
The MOA WiFi heating element serves as a heat source in electric radiators filled with a heating medium, as well as in dual - fuel (hydronic - electric) radiators. It enables both manual and remote (via the TERMA Home application) precise temperature adjustment - locally in the range of 16 – 25°C, or 15 – 30°C via the app. It also features a Dryer Mode for rapid room heating or efficient towel drying.
Design
Minimalist and modern design featuring a simple control panel with LED indicators and intuitive buttons.
The compact shape is aesthetically matched to the radiator body.
Operating modes are communicated to the user through illuminating LED colours on the control panel.
Finish options
Available colours: white, silver, black, and brass.
For bulk orders (minimum 100 units of any model in one finish), additional RAL palette colours are available upon request.
Connectivity and control
- Control via the TERMA HOME app (iOS, Android)
- Compatibility with TUYA Smart – starting Q1 2026
- Connectivity: Wi-Fi and Bluetooth
MOA WiFi
-
Model
-
Power
-
Class
-
Connection
-
Protection
-
WiFi
| L [mm] | Power [W] |
|---|---|
| 315 | 120 |
| 275 | 200 |
| 300 | 300 |
| 335 | 400 |
| 350 | 500 |
| 365 | 600 |
| 475 | 800 |
| 565 | 1000 |
| 660 | 1200 |
Step 1. Download the Application
Step 1. Download the Application Install the TERMA Home app on your smartphone or tablet.
Step 2. Enable Required Function. Make sure the following are active:
- Internet access
- Bluetooth
- Location services
Step 3. Create an Account
Launch the app, register with your email and password, then log in.
Step 4. Activate Pairing Mode
- Turn on the device.
- Press and hold both buttons for approximately 3 seconds until the LEDs briefly flash white.
- The LED will then pulse slowly in blue - this indicates the device is ready for pairing (valid for 1 minute).
Step 5. Add the Device in the App
- Select Add Device.
- Choose your model from the list.
- Enter the 6-digit access code provided with the unit.
Step 6. Choose the Connection Method
Bluetooth - Works when you are near the device. Select Connect via Bluetooth. The LED will illuminate white.
Wi-Fi – Enables control from anywhere. Ensure your phone is connected to the same 2.4 GHz Wi-Fi network as the device.
Step 7. Done!
Your device has been added and operates according to the default schedule (LED glows green). You can now assign a custom name and add it to a selected zone.
Step 8. Changing the Connection Metho
If you wish to switch connection types later, go to:
Device Settings → Advanced Settings → Change Connection Method. .